Thanks Rudy, Yes, I am very happy with Signalink, I use one with my ICOM 718 for data so wish to move onto 6 metres now Regards Jon
--- In digitalradio@yahoogroups.com, "Rudy Benner" <ben...@...> wrote: > > Part Numbers & Options: > SignaLink USB Part Numbers (please specify when ordering): > > a.. SLUSB4R - For 4-Pin Round Mic Connector > b.. SLUSB8R - For 8-Pin Round Mic Connector > c.. SLUSBRJ1 - For RJ-11 Mic Connector > d.. SLUSBRJ4 - For RJ-45 Mic Connector > > e.. SLUSB5PD - For 5-pin DIN Data / Accessory Port Connector > f.. SLUSB8PD - For 8-pin DIN Data / Accessory Port Connector > g.. SLUSB13I - For ICOM 13-pin DIN Accessory Port Connector > h.. SLUSB13K - For Kenwood 13-pin DIN Accessory Port Connector > i.. SLUSB6PM - For 6-pin mini DIN Data / Accessory Port Connector > j.. SLUSBK3 - For the Elecraft K3's rear panel Audio In/Out & PTT jacks > > k.. SLUSBNC - Un-terminated cable (bare wires on radio end) for building > your own cable > Extra Radio Cables: > > a.. SLCAB4R - For 4-Pin Round Mic Connector > b.. SLCAB8R - For 8-Pin Round Mic Connector > c.. SLCABRJ1 - For RJ-11 Mic Connector > d.. SLCABRJ4 - For RJ-45 Mic Connector > > e.. SLCAB5PD - For 5-Pin DIN Data / Accessory Port Connector > f.. SLCAB8PD - For 8-Pin DIN Data / Accessory Port Connector > g.. SLCAB13I - For ICOM 13-Pin DIN Accessory Port Connector > h.. SLCAB13K - For Kenwood 13-Pin DIN Accessory Port Connector > i.. SLCAB6PM - For 6-Pin mini DIN Data / Accessory Port Connector > j.. SLCABK3 - For the Elecraft K3's rear panel Audio In/Out & PTT jacks > > k.. SLCABNC - Un-terminated cable (bare wires on radio end) for building > your own cable > Accessories: > > a.. Plug & Play Jumper Modules - Click here for part numbers and radios > supported > b.. SLHEAD - SignaLink Programming Header for wiring your own jumper module > The instructions will include details on the jumpers. You will need a cable > to go from the Signalink USB to the headphone jack also. > > I own 2 Signalink USB s and am very happy with them. > > > From: jon_g4fut > Sent: Tuesday, July 20, 2010 12:44 PM > To: digitalradio@yahoogroups.com > Subject: [digitalradio] Yaesu FT-690 > > > > Does anyone use the FT 690 for 50Mhz digital? Especially with the Signalink. > If so I'd like to know the equipment number of the connecting serial cable > which attaches both these units. > Jon G4FUT > > > > > > > -------------------------------------------------------------------------------- > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.839 / Virus Database: 271.1.1/3017 - Release Date: 07/20/10 > 02:36:00 >