Hi Denis,
I'll attach pci device output below, but before that let me tell what i did.
Suspecting that my card wasnt probed by driver, I've went cheking on radeon and r200 drivers source.
I've realised on radeon driver (for 0.9.22) it is checking on FB_ACCEL flag on fb.h. Although i have double checked i have ati constant defined in fb.h, it seems driver was skipping it. To try out, i simply hacked that check in probing function and when i recompile the driver, it loads (without burning up anything) and it works.
Of course, it is not the correct way and i still have a problem. flipping a surface on a window(a lut8 surface) is very slow (up to 7 ms on 32 bit depth and 4 ms on 16 bit depth).
I've looked at r200 driver, although my chipset is defined as "5962" and available in /proc/bus/pci, it is not probed as well.
Anyway, I am able to force radeon driver to load, but it is not the correct way. when i want to draw to overlay layer, i get no image at all, and flipping some kind of surfaces are slow. Just as a side note, i am using flipping because i write to the surface directly after i lock it. And reasong for lut8 surface is, image that i am suppose to display on surface is a monochrome 8bpp image directly taken from camera buffer.
by the wayI am able to hit 290 fps for 320x240 image size on i810 card with p3-800.
Here is the lspci output.
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP
Flags: bus master, 66MHz, medium devsel, latency 16
Capabilities: [80] AGP version 1.0
0000:00:10.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5962 (rev 01) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 5962
Flags: bus master, 66MHz, medium devsel, latency 255, IRQ 48
Memory at 98000000 (32-bit, prefetchable) [size=128M]
I/O ports at 802400 [size=256]
Memory at 90000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at f1000000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI
Flags: bus master, 66MHz, medium devsel, latency 16
0001:10:17.0 ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O
Flags: bus master, medium devsel, latency 16
Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB (prog-if 10 [OHCI])
Flags: medium devsel
Memory at f3000000 (32-bit, non-prefetchable) [size=4K]
0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB (prog-if 10 [OHCI])
Flags: medium devsel
Memory at f3001000 (32-bit, non-prefetchable) [size=4K]
0001:10:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB (prog-if 10 [OHCI])
Flags: bus master, medium devsel, latency 16, IRQ 29
Memory at 80083000 (32-bit, non-prefetchable) [size=4K]
0001:10:1b.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB
Flags: bus master, medium devsel, latency 16, IRQ 63
Memory at 80082000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
0001:10:1b.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB
Flags: bus master, medium devsel, latency 16, IRQ 63
Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
0001:10:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20 [EHCI])
Subsystem: NEC Corporation USB 2.0
Flags: bus master, medium devsel, latency 16, IRQ 63
Memory at 80080000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI
Flags: bus master, 66MHz, medium devsel, latency 16
0002:20:0d.0 ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100
Flags: bus master, medium devsel, latency 32, IRQ 39
Memory at f5004000 (32-bit, non-prefetchable) [size=16K]
0002:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81) (prog-if 10 [OHCI])
Subsystem: Apple Computer Inc.: Unknown device 5811
Flags: bus master, medium devsel, latency 64, IRQ 40
Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80)
Flags: bus master, 66MHz, slow devsel, latency 16, IRQ 41
Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at f5100000 [disabled] [size=1M]
On 7/22/05, Denis Oliver Kropp <[EMAIL PROTECTED]> wrote:
Quoting Korkut Gule:
> I was wondering what kind of output i can send to list so that you can
> help me to debug this ?
lspci -v
--
Best regards,
Denis Oliver Kropp
.------------------------------------------.
| DirectFB - Hardware accelerated graphics |
| http://www.directfb.org/ |
"------------------------------------------"
_______________________________________________ directfb-dev mailing list [email protected] http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-dev
