Hi, I just started using DirectFB on my Matrox G400 32MB DH card, and I'm
wondering if it's possible to do multi head using DFB?
My current (XFree86) setup is:
MGA(0) -> Left Monitor
MGA(1) -> TV (Scart-RGB)
R128 -> Right Monitor
is it possible to have DFB drive all of them?
(not xinerama style, but just so one mouse/kb can be used for all displays)
If it's currently possible, any advice how?
If it's not, how hard would it be to implament, I'm willing to have a crack
at it if everybody else has other htings they need to do...
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
I also have a problem using TV out on my Matrox under DFB..
Output from dfb program:
(*) DirectFB/GraphicsDevice: Matrox G400/G450/G550 0.6 (convergence integrated media
GmbH)
(!) DirectFB/Matrox/Maven: Error opening `/dev/i2c-2'!
--> No such device
(!) DirectFB/Core/layers: Failed to initialize layer 2!
(!) DirectFB/Core: Could not initialize 'layers' core!
--> Not supported!
(!) DirectFB/Core: Error
directfbrc:
sync
disable-module=linux_input
graphics-vt
screenshot-dir=/home/jbit/ScreenShots
matrox-crtc2
matrox-tv-standard=pal
matrox-cable-type=scart-rgb
/proc/bus/i2c:
i2c-0 i2c DDC:fb0 #0 on i2c-matroxfb Bit-shift algorithm
i2c-1 i2c DDC:fb0 #1 on i2c-matroxfb Bit-shift algorithm
i2c-2 i2c MAVEN:fb0 on i2c-matroxfb Bit-shift algorithm
Devices:
crw-r--r-- 1 root root 89, 0 Jul 14 01:20 /dev/i2c-0
crw-r--r-- 1 root root 89, 1 Jul 14 01:21 /dev/i2c-1
crw-r--r-- 1 root root 89, 2 Jul 14 01:21 /dev/i2c-2
I use the stock 2.4.20 drivers as modules, I also use fusion.
Other then that, DirectFB with XDirectFB very much RULES :)
Any help would be appriciated, thanks
--jbit
--
o|_ o_|_ ._ __|_
||_)| |_o| |(/_|_
_|
--
Info: To unsubscribe send a mail to [EMAIL PROTECTED] with
"unsubscribe directfb-users" as subject.
