Quoting Ville Syrj�l� <[EMAIL PROTECTED]>:
> > I found some old Matrox Millenium II card and put it aside my Matrox
> Millenium
> > G450. When I try to run directfb on it, I get a corrupted display :
>
> Millennium I w/ 4MB works fine here but I didn't try with two cards in the
> machine at the same time.
The normal framebuffers seem to work fine. I have /dev/fb0 for Millenium II and
/dev/fb1&2 for Millenium G450. For the moment, I'm running my x-server on
/dev/fb0.
> Which card is initialized by BIOS? Do you get the corruption if you change
> the order?
It was the G450 AGP card. I switched, but it did not change the buffer
corruption. I cannot recall how much memory is on the Milleniun II. This is
what I get from lspci -v :
01:06.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2164W [Millennium
II] (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc.: Unknown device 2007
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at d6000000 (32-bit, prefetchable) [size=16M]
Memory at dd000000 (32-bit, non-prefetchable) [size=16K]
Memory at de000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Kristof
--
Info: To unsubscribe send a mail to [EMAIL PROTECTED] with
"unsubscribe directfb-users" as subject.
