Hi,
i have similar problem here. I would like to run mame emulator and
freevo using the same parameters in directfbrc if posible both in 32
depth modes. So far i had luck in numerous try&fail combinations and now
i can run freevo not using SDL enviroment variables or i can run xmame
using them but no luck with freevo. Actualy freevo starts but i can't
see it on second head. I should also say that when i run freevo it runs
perfectly but then without SDL variables xmame gives me black screen.
Is there a winning combination or some sort of a workaround my patience
is wearing thin.
kernel 2.6.10.11
fusion-full-linux-2.6.9.patch.bz2
matroxfb-full-memory-linux-2.6.6.patch.bz2
matroxfb-g400-clock-2.6.6.patch.bz2
freevo works; xmame not:
no SDL vars
freevo ~ # cat /etc/directfbrc__
tmpfs=/dev/shm
matrox-crtc2
matrox-crtc2=/dev/fb1
matrox-tv-standard=pal
matrox-cable-type=composite
mode=720x576
primary-layer=02
depth=32
no-cursor
bg-color=FF000000
pixelformat=RGB32
hardware
sync
no-vt-switch
-----------------------------------------------------
xmame works; freevo not:
SDL_DIRECTFB_MGA_CRTC2=1
SDL_DIRECTFB_MGA_STRETCH=1
SDL_VIDEODRIVER=directfb
SDL_VIDEO_YUV_HWACCEL=1
freevo ~ # cat /etc/directfbrc
tmpfs=/dev/shm
matrox-crtc2
matrox-tv-standard=pal
matrox-cable-type=composite
hardware
sync
no-vt-switch
at least i could use some direction points where to look for a problem.
_______________________________________________
directfb-users mailing list
[email protected]
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
