Dave wrote:
>
> Claudio Ciccani wrote:
>
>
>>Dave wrote:
>>
>>
>>
>>>I have recently configured xdirectfb with a matrox card, and it works
>>>fine, and want to use xine on top of it, for proper scaling. It runs
>>>well, but xine doesnt specifically have a "xdirectfb" video output
>>>option, how do I know for sure that xine will use the matrox BES and
>>>hardware colorspace conversion of xdirectfb? xine thinks its using the
>>>"xv" video output method.
>>>
>>>
>>
>>The XV extension of XDirectFB wraps the available overlay layer (in your
>>case it's using the Matrox BES).
>>
>>
>>
>>
>>>I see some interlacing artifacts in the
>>>picture, and was pretty sure that the matrox had a hardware
>>>deinterlacer, but how does one tell xine to use it?
>>>
>>>
>>
>>To enable deinterlacing from gxine press Ctrl + L.
>>
>>
>
> I use xine-ui, enabling deinterlacing with -D, hope thats right
>
>
>>
>>
>>
>>>and as well flipping
>>>on vblank to rid of vertical tearing in the video image.
>>>
>>>
>>>
>>
>>If you have a recent version of xine-lib, you should have a driver
>>called XDirectFB too (built when xine-lib is configured with
>>--enable-directfb). This driver has a configuration option called
>>"video.device.directfb_vsync"; set it to 1 to enable flipping on vblank.
>>
>>
>>
>
> I have tried every which way to get xine-lib to make a driver called
> xdirectfb, but it never does, even with the --enable-directfb compile
> option, (xine-lib is recent CVS). It makes the "directfb" driver, but
> never an "xdirectfb" driver. I have tried with xdirectdb running, and
> still no go.
>
> Unless the driver in xine-lib is newer than a few weeks old CVS, it dont
> work for me :(
>
xine -V XDirectFB should work.
--
Regards,
Claudio Ciccani
[EMAIL PROTECTED]
http://directfb.org
http://sf.net/projects/php-directfb
_______________________________________________
directfb-users mailing list
[email protected]
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
