Hello everyone, My Kernel version is 2.6.11.8. I have installed directfb version 0.9.22. My Hardware configuration is Intel 815 and i enabled frame buffer corresponding to this hardware. When i run my application the following error is generated.
(*) DirectFB/Core: Single Application Core. (2006-03-25 05:22) (*) Direct/Memcpy: Using MMXEXT optimized memcpy() (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 3294)... (*) Direct/Thread: Running 'PS/2 Input' (INPUT, 3295)... (!!!) *** UNIMPLEMENTED [fusion_reactor_set_lock] *** [ reactor.c:802] (*) DirectFB/Input: IMPS/2 Mouse 1.0 (Convergence GmbH) (*) Direct/Thread: Running 'Keyboard Input' (INPUT, 3296)... (*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH) (*) DirectFB/Genefx: MMX detected and enabled (*) DirectFB/Graphics: MMX Software Rasterizer 0.6 (convergence integrated media GmbH) (!) DirectFB/FBDev: No supported modes found in /etc/fb.modes and current mode not supported! (!) DirectFB/FBDev: Current mode's pixelformat: rgba 6/0, 6/0, 6/0, 0/0 (4bit) (!) DirectFB/Core/layers: Failed to initialize layer 0! --> Initialization error! (!) DirectFB/Core: Could not initialize 'layers' core! --> Initialization error! (#) DirectFBError [Create direct frame buffer failed]: Initialization error! (!) [ 3291: 0.000] --> Caught signal 11 (at 0x50, invalid address) <-- Killed ***********Could any one tell me what could be the problem and how to rectify. Please reply as soon as possible****************. Regards Neeraj Gupta _______________________________________________ directfb-users mailing list [email protected] http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
