Hi Attilio,
I had already included the no-hardware in my /etc/directfbrc
file. Please find the contents of my file below.
system=fbdev
fbdev=/dev/fb0
mode=640x480
depth=32
pixelformat=RGB32
no-hardware
no-vt-switch
disable-module=keyboard
disable-module=serialmouse
disable-module=lirc
Thank you
Pradeep
On 8/31/07, Attilio Fiandrotti <[EMAIL PROTECTED]> wrote:
>
> That looks definitely like a directfb issue, unrelated to gtkdfb, anyway
> what if you add "no-hardware" to your /etc/directfbrc file ?
>
> regards
>
> Attilio
>
> Pradeep Chimakurthy wrote:
> > Hello,
> > I have cross compiled GTK-DFB to use it on a xtensa processor.
> > When I tried to run gtk-demo
> > I ended up with the below error message. I have not compiled any gfx
> > drivers.
> >
> ***************************************************************************************************
> > (*) DirectFB/Core: Single Application Core. (2007-08-30 22:28) [ DEBUG ]
> > (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 659)...
> > (*) Direct/Modules: suppress module 'serialmouse'
> > (*) Direct/Modules: suppress module 'keyboard'
> > (!) Direct/Modules: Could not open module directory
> > `/tmp/directfb-1.0-0/gfxdriv
> > ers'!
> > --> No such file or directory
> > (*) DirectFB/Graphics: Generic Software Rasterizer 0.6 ( directfb.org
> > <http://directfb.org/>)
> > (*) DirectFB/Core/WM: Default 0.3 (directfb.org <http://directfb.org/>)
> > (#) DirectFBError [gdk_display_open: GetDisplayLayer]: Requested ID not
> > found!
> >
> > (gtk-demo:655): Gtk-WARNING **: cannot open display:
> > (!!!) *** WARNING [Application exited without deinitialization of
> > DirectFB!] *
> > ** [core.c:775 in dfb_core_deinit_check()]
> > Interface instances remaining (2):
> > - 'IDirectFB' at 0x42d868 (dfb) allocated in DirectFBCreate
> > (directfb.c: 197)
> > - 'IDirectFBDisplayLayer' at 0x42ec50 (*context->interface) allocated
> > in GetDi
> > splayLayer_Callback (idirectfb.c : 1475)
> >
> >
> *****************************************************************************************
> > After reading a previous post in the gtk mailing list, I decided to test
> > direct-fb alone first and
> > ran dfbinfo which I think shows that my FB is being detected
> >
> >
> ******************************************************************************************
> > (*) DirectFB/Core: Single Application Core. (2007-08-30 01:30)
> > (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 715)...
> > (!) Direct/Modules: Could not open module directory
> > `/tmp/directfb-1.0-0/gfxdrivers'!
> > --> No such file or directory
> > (*) DirectFB/Graphics: Generic Software Rasterizer 0.6 ( directfb.org
> > <http://directfb.org/>)
> > (*) DirectFB/Core/WM: Default 0.3 (directfb.org <http://directfb.org/>)
> >
> > Screen (00) FBDev Primary Screen (primary screen)
> > Caps: VSYNC POWER_MANAGEMENT
> > Layer (00) FBDev Primary Layer (primary layer)
> > Type: GRAPHICS
> > Caps: SURFACE BRIGHTNESS CONTRAST SATURATION
> >
> >
> **********************************************************************************************
> > So I decided to go further and run the example from the directfb
> > site for the loading and image section.
> > But it stopped after loading PNG implementation and replaced my boot
> > logo with a black
> > screen.
> >
> ************************************************************************************************
> > (*) DirectFB/Core: Single Application Core. (2007-08-30 22:28) [ DEBUG ]
> > (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 659)...
> > (*) Direct/Modules: suppress module 'serialmouse'
> > (*) Direct/Modules: suppress module 'keyboard'
> > (!) Direct/Modules: Could not open module directory
> > `/tmp/directfb-1.0-0/gfxdriv
> > ers'!
> > --> No such file or directory
> > (*) DirectFB/Graphics: Generic Software Rasterizer 0.6 ( directfb.org
> > <http://directfb.org/>)
> > (*) DirectFB/Core/WM: Default 0.3 (directfb.org <http://directfb.org/>)
> > (*) Direct/Interface: Loaded 'PNG' implementation of
> > 'IDirectFBImageProvider'.
> >
> >
> ****************************************************************************************************
> > I was not able to determine what I could do next. Could you please
> > suggest how I could correct the above errors ?
> >
> > Thank you for any help.
> >
> > Sincerely
> > Pradeep
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > directfb-users mailing list
> > [email protected]
> > http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
>
>
_______________________________________________
directfb-users mailing list
[email protected]
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
