Reply all so this goes toe the mailing list. Others may have ideas or the same problem.
I specify --with-inputdrivers to configure. (--with-inputdrivers=linuxinput,tslib) Also I provide the location of TSLIB_CFLAGS and TSLIB_LIBS so the tslib input driver can build. Make sure tslib and if your using the linux input sub-system builds and is installed on your target. /usr/lib/directfb-1.1-0/inputdrivers/libdirectfb_linux_input.so /usr/lib/directfb-1.1-0/inputdrivers/libdirectfb_tslib.so Craig On Friday 11 January 2008 11:59:27 am som j wrote: > Hello , > > These are my configure options > > ./configure --host=arm-linux --prefix=/DirectFB --enable-fbdev > --enable-devmem --disable-x11 --disable-video4linux2 --disable-sysfs > --disable-multi --disable-sdl --disable-video4linux > --datadir=/DirectFB/usr/lib --with-png=yes --with-freetype=yes > --disable-debug --disable-debug-support > > Thanks > Som > > On Jan 11, 2008 10:40 AM, Craig Matsuura <[EMAIL PROTECTED]> wrote: > > Please send your configure line you used to build directfb. Was it > > compiled > > with tslib support? > > > > Craig > > > > On Friday 11 January 2008 11:36:36 am som j wrote: > > > Thanks for that info.jsut wanted to share my log of the df_window > > > > > > [EMAIL PROTECTED]:/# dfbinfo > > > > > > > > > > > > =======================| DirectFB 1.1.1 |======================= > > > > > > (c) 2001-2007 The DirectFB Organization (directfb.org) > > > > > > (c) 2000-2004 Convergence (integrated media) GmbH > > > > > > ------------------------------------------------------------ > > > > > > > > > > > > (*) DirectFB/Core: Multi Application Core. (2008-01-09 03:18) > > > > > > (*) Fusion/SHM: NOT using MADV_REMOVE (2.6.19.0 < 2.6.19.2)! > > > > [0x02061300] > > > > > (*) Direct/Thread: Running 'Fusion Dispatch' (MESSAGING, 325)... > > > > > > (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 330)... > > > > > > Couldnt load module pthres > > > > > > Couldnt load module pthres > > > > > > (*) Direct/Thread: Running 'Keyboard Input' (INPUT, 331)... > > > > > > (*) DirectFB/Input: Keyboard 0.9 (directfb.org) > > > > > > (!) Direct/Modules: Could not open module directory > > > `/usr/lib/directfb-1.1-0 /gfx > > > > > > drivers'! > > > > > > --> No such file or directory > > > > > > (*) DirectFB/Graphics: Generic Software Rasterizer 0.6 (directfb.org) > > > > > > (*) DirectFB/Core/WM: Default 0.3 (directfb.org) > > > > > > (*) FBDev/Surface: Allocated 800x480 32bit RGB32 buffer at offset 0 > > > and pitch 32 > > > > > > 00. > > > > > > (*) FBDev/Mode: (Post)Setting 800x480 RGB32 > > > > > > (*) FBDev/Mode: Switched to 800x480 (800x480) at 32 bit RGB32 (wanted > > > RGB32). > > > > > > (*) FBDev/Mode: Testing 800x480 RGB32 > > > > > > (*) FBDev/Mode: Preparing switch to 800x480 RGB32 > > > > > > (*) FBDev/Mode: (Post)Setting 800x480 RGB32 > > > > > > > > > > > > > > > > > > Screen (00) FBDev Primary Screen (primary screen) > > > > > > Caps: VSYNC POWER_MANAGEMENT > > > > > > > > > > > > Layer (00) FBDev Primary Layer (primary layer) > > > > > > Type: GRAPHICS > > > > > > Caps: SURFACE BRIGHTNESS CONTRAST SATURATION > > > > > > > > > > > > > > > > > > Input (00) Keyboard (primary keyboard) > > > > > > Type: KEYBOARD > > > > > > Caps: KEYS > > > > > > > > > > > > (!!!) *** WARNING [still objects in 'Layer Context Pool'] *** > > > [../../../lib/fusion/object.c:241 in fusion_object_pool_destroy()] > > > > > > (!) Fusion/Call: invalid call > > > > > > (!) DirectFB/FBDev: Could not restore variable screen information! > > > > Invalid > > > > > argument > > > > ######################################################################### > >## > > > > >############ > > > > > > > > > > > > 1. Firstly the application takes a long time to execute. Am I > > > missing some options in the directfbrc file? > > > 2. Secondly I see some messages like "Couldn't load module pthres" > > > > .. > > > > > How can I overcome this error? > > > 3. Warnings from fusion modules?? > > > 4. DirectFB not able to restore the Screen Info?? > > > 5. Any issue with the. /configure options ?? > > > 6. There is no Touch input registered with the DirectFB. ?? > > > > > > Regards > > > Som > > > > > > On Jan 11, 2008 10:21 AM, Craig Matsuura <[EMAIL PROTECTED]> wrote: > > > > Did you compile directfb for tslib support? > > > > > > > > > > > > If you get an error like the following: > > > > > > > > =======================| DirectFB 1.1.1 |======================= > > > > (c) 2001-2007 The DirectFB Organization (directfb.org) > > > > (c) 2000-2004 Convergence (integrated media) GmbH > > > > ------------------------------------------------------------ > > > > > > > > (*) DirectFB/Core: Single Application Core. (2008-01-08 15:22) > > > > (!) [11981: 0.000] --> Caught signal 11 (at 0xb530e7dc, invalid > > > > address) > > > > <-- > > > > (!!!) *** WARNING [still objects in 'Layer Region Pool'] *** [ > > > > object.c > > > > > > :241 > > > > > > > > in fusion_object_pool_destroy()] > > > > (!!!) *** WARNING [still objects in 'Layer Context Pool'] *** [ > > > > object.c > > > > > > :241 > > > > > > > > in fusion_object_pool_destroy()] > > > > (!!!) *** WARNING [still objects in 'Surface Pool'] *** [object.c > > : > > :241 > > : > > > > in fusion_object_pool_destroy()] > > > > *** glibc detected *** free(): invalid pointer: 0x080589a0 *** > > > > (!) [11981: 0.001] --> Caught signal 6 (sent by pid 11981, uid 0) > > > > <-- > > > > > > (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 10056)... > > > > (!) Direct/Modules: Unable to dlopen > > > > `/mnt/internal/opt/lib/directfb-1.1-0 > > > > /inputdrivers/libdirectfb_tslib.so'! > > > > > > --> /mnt/internal/opt/lib/directfb-1.1-0 > > > > /inputdrivers/libdirectfb_tslib.so: > > > > undefined symbol: ts_close > > > > (*) Direct/Thread: Running 'Linux Input' (INPUT, 10057)... > > > > (*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1 > > > > (directfb.org > > > > ) > > > > > > (*) Direct/Thread: Running 'Linux Input' (INPUT, 10058)... > > > > (*) DirectFB/Input: Power Button (FF) (2) 0.1 (directfb.org) > > > > (*) Direct/Thread: Running 'Linux Input' (INPUT, 10059)... > > > > > > > > > > > > You can use LD_PRELOAD to make sure the libts library is loaded. > > > > > > > > You should see something like this: > > > > > > > > > > > > /mnt/internal/opt/bin# ./df_window > > > > > > > > =======================| DirectFB 1.1.1 > > > > |======================= (c) 2001-2007 The DirectFB Organization > > > > (directfb.org) (c) 2000-2004 Convergence (integrated media) GmbH > > > > ------------------------------------------------------------ > > > > > > > > (*) DirectFB/Core: Single Application Core. (2008-01-08 15:22) > > > > (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 10592)... > > > > (*) Direct/Thread: Running 'tslib Input' (INPUT, 10593)... > > > > (*) DirectFB/Input: tslib touchscreen 0 0.1 (tslib) > > > > (*) Direct/Thread: Running 'Linux Input' (INPUT, 10594)... > > > > (*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1 > > > > (directfb.org > > > > ) > > > > > > (*) Direct/Thread: Running 'Linux Input' (INPUT, 10595)... > > > > (*) DirectFB/Input: Power Button (FF) (2) 0.1 (directfb.org) > > > > (*) Direct/Thread: Running 'Linux Input' (INPUT, 10596)... > > > > (*) DirectFB/Input: Power Button (CM) (3) 0.1 (directfb.org) > > > > (*) Direct/Thread: Running 'Linux Input' (INPUT, 10597)... > > > > (*) DirectFB/Input: Sleep Button (CM) (4) 0.1 (directfb.org) > > > > (*) DirectFB/Graphics: Generic Software Rasterizer 0.6 (directfb.org) > > > > > > > > > > > > Craig > > > > > > > > On Friday 11 January 2008 10:55:24 am som j wrote: > > > > > Thanks for the help > > > > > > > > > > i have these set but the issue is touch doent seem to work with the > > > > > DirectFB application. > > > > > > > > > > This is my env settings > > > > > > > > > > export TSLIB_TSDEVICE=/dev/input/event1 > > > > > export TSLIB_CONFFILE=/etc/ts.conf > > > > > export TSLIB_PLUGINDIR=/usr/lib/ts > > > > > export TSLIB_CALIBFILE=/etc/pointercal > > > > > export TSLIB_FBDEVICE=/dev/fb/0 > > > > > export TSLIB_CONSOLEDEVICE=/dev/tty > > > > > > > > > > I'm able see the TS_calibrate and TS_test working.But i try the > > > > > > > > df_window > > > > > > > > > application which requires a input like a mouse or touch , nothin > > > > seems > > > > > > to > > > > > > > > > go ahead. > > > > > > > > > > Any inputs on this... > > > > > > > > > > Som > > > > > > > > > > On Jan 9, 2008 6:13 PM, Craig Matsuura <[EMAIL PROTECTED]> > > > > wrote: > > > > > > You need to setup the Environment variables for tslib. Also you > > > > need > > > > > > to > > > > > > > > > > have > > > > > > built directfb to support tslib. > > > > > > > > > > > > > > > > > > export TSLIB_CALIBFILE='/etc/pointercal.tslib' > > > > > > export TSLIB_CONFFILE='/etc/ts.conf' > > > > > > export TSLIB_TSDEVICE='/dev/ttyS0' > > > > > > > > > > > > Your TSLIB_TSDEVICE will probably be different from my example. > > > > > > > > > > > > also the /etc/ts.conf should have the correct module_raw > > > > uncommented. > > > > > > > > Craig > > > > > > > > > > > > On Wednesday 09 January 2008 4:16:15 pm som j wrote: > > > > > > > Hello all, > > > > > > > > > > > > > > Currently i have the DirectFB 1.1.1 and tslib 1.0.0 working > > > > > > > fine seperatly.But when i am trying to get the touch support > > > > > > > enabled > > > > for > > > > > > the > > > > > > > > > > > DirectFB Application (df_winodw), i seem to have no clue as how > > > > to > > > > > > > > enable > > > > > > > > > > > > > the support in the directfbrc file. > > > > > > > > > > > > > > Any inputs on the same will be really appreciated. > > > > > > > > > > > > > > Thanks in advance > > > > > > > > > > > > > > Regards > > > > > > > Som _______________________________________________ directfb-users mailing list [email protected] http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
