Hi Tomek.
so that's good that you have /etc/fb.modes.
Now DirectFB tries then to read this file. It looks like the syntax is
ok, so that probably will work.
The possibility then is that something goes wrong while testing the modes.
The easiest way is to build directfb with --enable-debug and to run with
--dfb:debug (or put debug in directfbrc) and then look at the lines with
FBDev/Mode in them for strange things or errors.
hth
Niels
[email protected] wrote:
"If you use fbdev, it means you did not define modes." :
ls -l /dev/fb*
crw-rw---- 1 root root 29, 0 Jan 1 00:00 /dev/fb0
crw-rw---- 1 root root 29, 1 Jan 1 00:00 /dev/fb1
"This probably means you have an empty /etc/fb.modes.":
cat /etc/fb.modes
mode "1920x1080 8bit"
geometry 1920 1080 1920 1080 8
timings 0 0 0 0 0 0 0
endmode
..snip snip
mode "132x132 32bit"
geometry 132 132 132 132 32
timings 0 0 0 0 0 0 0
endmode
Regards,
Tomek.
---------------------------------------------------------------
Zobacz jak pracuje sie na wysokosciach.
Kliknij >>> http://link.interia.pl/f2384
--
.------------------------------------------.
| DirectFB - Hardware accelerated graphics |
| http://www.directfb.org/ |
"------------------------------------------"
_______________________________________________
directfb-users mailing list
[email protected]
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
