On Tue, Jan 19, 2010 at 12:32 AM, Gaye Abdoulaye Walsimou <[email protected]> wrote: > Uri Yosef wrote: >> Hello, >> >> I want to get directfb work with mini2440 board / friendly ARM + I >> have 7" touchscreen (800x460-50Hz 16bit). >> >> I cross compiled directfb 1.4.3 and tslib, but when I run dfbinfo I >> get the following errors: >> >> ~ # dfbinfo >> >> ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.3 |~~~~~~~~~~~~~~~~~~~~~~~~~~ >> (c) 2001-2009 The world wide DirectFB Open Source Community >> (c) 2000-2004 Convergence (integrated media) GmbH >> ---------------------------------------------------------------- >> >> (*) DirectFB/Core: Single Application Core. (2010-01-17 23:07) >> (*) Direct/Memcpy: Using libc memcpy() >> (*) Direct/Thread: Started 'VT Switcher' (-1) [CRITICAL OTHER/OTHER >> 0/0] <8388608>... >> (*) Direct/Thread: Started 'VT Flusher' (737) [DEFAULT OTHER/OTHER >> 0/0] <8388608>... >> (*) DirectFB/FBDev: Found 's3c2410fb' (ID 0) with frame buffer at >> 0x33a00000, 750k (MMIO 0x00000000, 0k) >> Couldnt load module pthres >> (*) DirectFB/Graphics: Generic Software Rasterizer 0.6 (directfb.org) >> (!) DirectFB/FBDev: No supported modes found in /etc/fb.modes and >> current mode not supported! >> (!) DirectFB/FBDev: Current mode's pixelformat: rgba 5/11, 6/5, 5/0, 0/0 >> (16bit) >> (!) DirectFB/Core/layers: Failed to initialize layer 0! >> --> Initialization error! >> (!) DirectFB/Core: Could not initialize 'layer_core' core! >> --> Initialization error! >> (#) DirectFBError [DirectFBCreate() failed]: Initialization error! >> ~ # >> >> fbset prints : >> ~ # fbset >> >> mode "800x480-50" >> # D: 23.896 MHz, H: 25.750 kHz, V: 50.000 Hz >> geometry 800 480 800 480 16 >> timings 41848 40 40 29 3 48 3 >> accel false >> rgba 5/11,6/5,5/0,0/0 >> endmode >> >> Any idea? >> Please help. >> >> Uri Yosef >> > > Hello Uri, > I had the same issue, removing __initdata in > arch/arm/mach-s3c2440/mach-mini2440.c > in mini2440_lcd_cfg array and mini2440_fb_info data structure, solves > the issue. > But after that, I ran other issues, may be I miscompile directfb, i need > to investigate more. > > Regards, > AWG >
It works. Thanks !!! Let me know if you need help with the build process. Uri _______________________________________________ directfb-users mailing list [email protected] http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
