Hi, Matt in a previous thread you were talking about making d/b that let DC component pass:
> If there is enough interest, I might make such a set of boards. If someone > else > is interested in the design, the BasicRX/TX are a great starting point, and I > can offer guidance. When i'm inspecting the my FIR output, it's really difficult to measure a 30ns (one sample) delay if the signal is not clean. Would it be possible to make a quick but not perfect hack of the basicTX and RX, something like: - removing transformer - Short-cut pin 3 to 6 and 1 to 4 the resulting impedance would be 40 Ohms (50 // 50+200+50), but is it really bad for low freq square wave < 2MHz ? And be sure to send a positive signal... I dont know how the converter will deal with the DC component and the 2's complement internal encoding though. Thanks, cheers Damien _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio