On Wed, Dec 13, 2006 at 05:57:10PM -0800, Dan Halperin wrote: > Dan Halperin wrote: > > Hi, > > > > Is it possible to use two USRPs on the same machine? I'm having trouble > > finding in the USRP constructors (python or C) where you tell it which > > board to use if it finds multiple. > > > Ok, so this question was in fact as stupid as I thought it might be. The > > parameter which_board does in fact control which USRP is chosen. > > The list of USRPs seems to be a stack, at least in Python (most recently > connected is number 0). Can anyone confirm or deny this? > > -Dan
I'm not sure about the order. It's in the order that libusb presents them to us (this could also very from OS to OS). However, if you care about which is which, after loading the firmware into them you can check each board's serial number. FWIW, you can fetch the serial number: which = ... u = usrp.source_c(which) s = u.serial_number() # s is a string Eric _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio