Rigas,
It is not necessary to cc: Eric and me when sending a message to the GNU
Radio mailing list, since we are on the list. Sending 2 copies of your
message in 15 minutes is also not necessary.
I have used a sinusoidal signal generator to test my USRP output
stream using a single or even the teo inputs to the RX daughterboard.
I suppose there are 4 channels at the end when I use both RX
daughterboard inputs, for I and Q so I tried to separate my output
data by using a 4 sample interleaving but it does not seem I can
reconstruct my input sinusoidal signal at all.
I have really a difficult time to decode the output data stream, I
know there is some kind of interleaving process, but I cannot
speculate what that is, can you please let me know of a reference or
of a webpage or if someone can tell me how to separate my output data
for each channel?
You need to send some code so we can tell you what you are doing wrong.
But the basics are : You need to tell the usrp source how many streams
you want. You need to set up the mux properly. If you want 4 streams,
you need to use the alternate rbf file.
Matt
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
