Yes. I double checked just to make sure. I have a usrp group. I'm in it. My
10-usrp.rules file is verbatim from the site. In the past, I had no trouble
accessing the usrp as non-root... but I triple-checked, and the group is setup
correctly.
I restarted, and I still get the same behavior.
j0j
> Date: Fri, 14 Mar 2008 10:54:42 -0700
> From: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> CC: discuss-gnuradio@gnu.org
> Subject: Re: [Discuss-gnuradio] Big bugs out of nowhere...
>
> On Fri, Mar 14, 2008 at 10:48:29AM -0400, Jared Jensen wrote:
> >
>
> > I haven't been using my usrp for a little while. I've been porting
> > my code to a TI C64x+. I came back to my usrp today and tried to
> > run just a basic receive for test data for my TI DSP. I got the
> > following error. In usbview I see a "USRP Rev4" under my ehci
> > controller. I thought it might be the board, so I grabbed my other
> > usrp, and the exact same thing happened. (This is with
> > gnuradio-3.1.1 ) So I tried my older gnuradio install, and tried to
> > run usrp_fft.py... and the same things happened. I checked
> > /usr/local/share/usrp. It has all of the rbf (see below). Has
> > anyone encountered this before? It was just a few months back
> > everything was great... I didn't touch gr for a while... came back
> > and BOOM. :( No joy.
>
>
> Have you followed the instructions for ensuring that you can access
> the USRP w/o being root?
>
> http://gnuradio.org/trac/wiki/UdevConfig
>
> Eric
>
>
> > usb_control_msg failed: error sending control message: Protocol error
> > usb_control_msg failed: error sending control message: Protocol error
> > usb_control_msg failed: error sending control message: Protocol error
> > usrp: failed to load fpga bitstream
> > /usr/local/share/usrp/rev4/std_2rxhb_2tx.rbf.
> >
> > File "/usr/local/lib/python2.5/site-packages/gnuradio/usrp1.py", line
> > 1232, in source_c
> > return _usrp1.source_c(*args)
> > RuntimeError: can't open usrp1
>
_________________________________________________________________
Connect and share in new ways with Windows Live.
http://www.windowslive.com/share.html?ocid=TXT_TAGHM_Wave2_sharelife_012008
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
