> On Mon, Mar 31, 2008 at 11:46 AM, Uwe Bonnes > <[EMAIL PROTECTED]> wrote: >> Hello, >> >> has there been any effort to expose more JTAG functionality via the FX2 so >> that the USRP FX2 firmware could be used with modified other JTAG software, >> like xc3sprog. > > As far as I can tell, not without some hardware modification. > > According to the schematics found here: > > > http://gnuradio.org/trac/browser/usrp-hw/trunk/usrp/interface.pdf?format=raw > > The JTAG section of the FPGA is pulled either high or low and has no > other connections. You're obviously free to do what you want with > your hardware, but I don't think you'll get much extra support from > the mailing list? > > I could be wrong, so please have at it!
This reminds me of a question I have about USRP2. My understanding is the USRP2 has a Xilinx Spartan 3, which I don't think come in anything other than BGA packages. Hopefully Matt brought the JTAG lines out in case people want to deadbug a header and use standard tools. Even better would be the 0.1" holes to install a header if desired. -Jeff _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio