On Thu, Mar 19, 2009 at 09:28:36AM -0700, leferman wrote: > > I am having a similar problem. I used ethtool to disable the pause > parameters for this interface; here is the output: > sudo ethtool -a eth1 > Pause parameters for eth1: > Autonegotiate: off > RX: off > TX: off > > But I still get this error when i run tx_samples: > sudo ./tx_samples -e eth1 > terminate called after throwing an instance of 'std::runtime_error' > what(): Unable to retrieve daughterboard info > Creating USRP2 Object.... Aborted > > I'm running the latest version of GNU Radio (freshly re-complied this > morning, revision 10644) on Ubuntu 8.10. I have a USRP2 with the firmware > and bit file that was complied on March 15th 2009 and the xcvr2450 > daughterboard. > > Are there any other ideas as to what could cause this (or did I disable flow > control pause wrong)? Thanks!
Please see this message from yesterday: http://lists.gnu.org/archive/html/discuss-gnuradio/2009-03/msg00466.html Try the new firmware without forcing anything with ethtool. (Leave autonegotiation enabled.) It should come up with a sensible answer. On my system I get: [...@octo trunk]$ ethtool -a eth1 Pause parameters for eth1: Autonegotiate: on RX: on TX: off Which is what I expect. Eric _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio