On Fri, Feb 12, 2010 at 10:34 AM, Achilleas Anastasopoulos <anas...@umich.edu> wrote: > Hi there, > > before delving into the details of the OFDM implementation in GNURAdio I > wanted to ask a high-level question: > > What is the method used for initial timing/frequency acquisition?
We use, by default, the standard Schmidl and Cox. There are two other methods that we wrote which you can use to varying degrees of success. My presentation from the wirel...@vt symposium, 2007, has details of all of these methods and why we use the one we do. > Is there one or two training OFDM symbols that precede the transmission of > data? and how many OFDM data symbols are following? Is this number > determined by the first training symbols or is it fixed? We use a method that only requires 1 training symbol. The much of the code is actually set up to allow you to put in however many you want, but you'll need to redesign some of the the receiver blocks to make use of them. The number of symbols following depends on the frame length you specify. In the benchmark_ofdm* examples, we default to 400 bytes with 200 occupied tones per symbol, so for BPSK this is (400*8/200) = 16 symbols. So there are 16 symbols between preambles. > Also, my understanding is that each data OFDM symbol has pilot tones for > continuous frequency/timing tracking, right? > > Thanks > Achilleas While I wrote the transmitter to allow for pilot tones, we don't actually make use of them in the receiver. Instead, we use a decision feedback equalizer to keep on track. Making use of the pilot tones in the receiver is definitely something we need done, though. Tom _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
