Hello
I am trying to wrap my head around the interprocess workings of USRP and
gnuradio
The FPGA contains a program that accepts commands from a C++ module ?
What is the logical presence of the hardware on LINUX ? is it at the /dev/USB
device ?
Are any other USRP's on ethernet ?
I am gathering you send a few commands to the USRP and it just starts sending
"listening period" data and you have to manage it on the host PC ?
I guess the easiest way way be to some how trap the data to a file and then do
your processing off line while you are testing.
Perhaps to improve performance memory could be used instead of HDD ?
I am trying to also work out, at the moment I am using a DSO and capturing the
values and processing the data in chunks. and I know that the data is what I
want to look at because it is triggered.
I guess you would have to turn your thinking around to like a FIFO buffer
instead for a "live" stream
Andrew
PS here is a dump of my latest Aircraft Mode S decoder in PERL
**********************************************************************
* *
* Mode S decoder using Digital Scope and perl on openSUSE LINUX *
* Andrew Rich - March 2010 *
* *
**********************************************************************
Sample rate 10MS/s
Max sample 37
Cut off 18.5
Array is 4000 points
Trigger on point 465
Start count 467
Pre-amble Match
DF starts at 547
DF value 17
Type ADS-B squitter
Address 7C6C5A
FT value is 4
Type Identity CAT set A
FLTID VOZ446
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
