On Thu, Mar 25, 2010 at 02:38:00PM -0700, Damien Serant wrote: > > Hi everybody, > > I'm trying to write samples acquired with the couple USRP2-WBX directly on > the hard disk thanks to the file sink. I'm using GRC and the decim factor is > set to 10 (idealy i need a factor 3).
With 16-bit I & Q, decimation 3 won't fit across gigabit ethernet. > Unfortunately the program overruns > (SSSS... on the terminal) that it seems normal to me considering the limited > write speed of an hard drive. > I'm looking for some "tricks" to be able to write at this sample rate. I > found a previous similar message in the mailing list but i have some > additional questions. > 1) Instead of write complex floats directly on the disk can i make this : > USRP2 source in short mode -> type conversion : short in char -> writing on > the disk with file_sink in char mode? Use the USRP2 in short mode, and write those samples to disk. At decimation 4, you'll need to be able to sustain writes to the disk at 100MB/s. ext3 won't do that because of journal posting. Mounting your ext3 filesystem as ext2 will help avoid that problem. If your drive won't write that fast, you'll need to find a faster solution. RAID 0, either hardware or software, is an obvious first step. You can also stripe across drives using LVM. Try google something like: linux disk performance. If you have enough ram to hold all of the samples that you need, capturing them all, then writing them to disk is an option. tmpfs might work (worth trying), but it's hard to beat allocating the memory that you need, touching it once to ensure it's really allocated, and mlock'ing it into physical ram. > 2) I read that it was possible to write directly on the RAM with the unix > command tmpfs. Any description of the procedure ? Try googling: /dev/shm Try googling: tmpfs To maximize your chances of getting useful help on this list, please read: http://gnuradio.org/redmine/wiki/gnuradio/ReportingErrors Good luck solving your problem! Eric _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio