Deal all, in Aalborg University we received last Thursday 3 USRP2 and 3 daughterboards XCVR2450. We started to test them, by running usrp2_fft.py, and in a first moment the output was:
usrp2: channel 0 not receiving usrp2::rx_sample() failed then, according to the suggestions done to another user in this forum, who had the same problem, we updated the firmware and the FPGA images and we partially solved the issue. Now it appears the FFT graphical sink, but it doesn't appear the receiving peak at any of the frequencies in the range 2.4-2.5 GHz and 4.9-5.9 GHz, despite we are transmitting at several of those frequencies. Moreover, the following error appears: get fences failed: -1 param:6, val:0 do you have any suggestion? please, let me know. Best Regards, Simone. -- View this message in context: http://old.nabble.com/USRP2-XCVR2450Daughterboard-First-Program-Error-tp28217211p28217211.html Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio