On Wed, Apr 14, 2010 at 16:26, Faisal Khan <faisalkhan1...@hotmail.com> wrote:
> I am using a RFX2400 card and wanted to use USRP2 to sample a BW of 50MHz, > in ISM band. If I am correct, by default, USRP2 uses a total of 32 > bits/sample (16 bit I and 16 bit Q). For looking at a BW of 50MHz, I would > need 50MS/s which will be equal to 50MS/s x 32 bit/sample = 1600Mbps. This > is beyond the limit of Gbit Ethernet. Is there a way I can use 8 bit > samples, and use a decimation by 2 to capture 50MHz. If yes, what steps do I > need to follow to achieve these two things. Just to mention it, I am using > usrp_rx_cfile command. This is indeed possible in principle, but would require some moderately complex changes to the USRP2 FPGA code, firmware, and host code to support. Johnathan _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio