On 04/30/2010 08:02 PM, Rahman Doost wrote: > hello everyone, > > I 'm trying to collect some samples from my spectrum sensing code > running on USRP2, which is a slightly revised version of > 'usrp_spectrum_sense.py'. My problem is that after some time during > the scan of some band, this message appears: "Failed to set frequency > to ...". For instance I let the board to sweep my band 1000 times but > after 100 or more scans (it's really variable) it stops its normal > operation and can't lock on a frequency anymore. > I tested this with both WBX and XCVR front-ends in 400M and 2.4G. But > the problem persists. Since I need to let the USRP2 work and collect > samples for quite a long period, I really need to come up with a > solution. I was wondering if someone has already encountered this > problem and has solved it. > > Rahman > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > Does the non-slightly-revised version do the same thing?
-- Marcus Leech Principal Investigator Shirleys Bay Radio Astronomy Consortium http://www.sbrac.org
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio