Thanks Josh;
One of the boxes was disabled, as you said. Thanks Marcus; I changed the sample rate as you suggested. So. I now have three problems remaining: 1) I need a way to start and stop the scan. I added a variable_chooser (Button) and a "valve"; but I don't know how to control the valve using the button. I checked the wiki and apparently, because the Open parameter is underlined this means it can be controlled by the graph when it is running. I couldn't find any examples of how to use the valve. 2) I think I need a throttle somewhere, because the USRP Source and the FFT Sink appear to be out of sink. Also the FFT Sink controls do not respond . 3) I am using a Sawtooth as the signal source. I appears that I can control the Amplitude and Frequency much like the Open parameter in Valve. This would be REAL handy for controlling the sweep rate (frequency) and for resetting the sweep (amplitude). But once again I don't know how L Thanks Again Guys for all the help J
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio