Hi Manuel,
Thanks for the reply.
I tried burning the matched FPGA and firmware images onto the SD card, but the
LED lights don't blink any more.
Here are the command fragments that I used to write the two images, in
succession onto the SD card
Write the new FPGA image to the SD card:
$ cd uhd/host/utils
$ sudo ./usrp2_card_burner.py --dev=/dev/sdb
--fpga=/home/elvis/Downloads/usrp2-image/u2_rev3_uhd_20100706.bin
Write the new firmware image to the SD card:
$ sudo ./usrp2_card_burner.py --dev=/dev/sdb
--fw=/home/elvis/Downloads/usrp2-image/txrx_uhd_20100706.bin
Best regards,
Elvis
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
