Hello again,
that was my mistake. My network devices have been installed with
different names by the System. The network card I connected my USRP2 to,
was names eth1. So I had to change the default settings of the gr_usrp2
block. So my code workes fine.
But the other question remains:
Would it be better to continue my work using the uhd or not?
Tobias
Am 27.07.2010 08:10, schrieb Tobias Schmid:
Hello,
I've got another short question.Up til now, I used the 3.2.2 release of
Gnuradio, but now I've updates it to the latest git version 3.3.1.
I wanted to check if my already written code still works, but I didn't even
recognize my USRP2. So my question is, do I have to update my USRP2 firmware
and the FPGA image as well? Isn't it possible to run my application without
updating the USRP?
If so, do I have the possibility to choose between the new UHD and the common
USRP firmware and FPGA image?
I had a look on the binaries offered on:
http://code.ettus.com/redmine/ettus/projects/public/wiki/U2binaries
Due to this page, I thougt it is possible to choose. On the host side I have
already installed the next git branch, as well as the uhd git from ettus. So
what would you suggest? Go on working with the common USRP2 staff or change to
UHD right now?
My final ambition is to implement some MIMO staff.
Thanks for your help
Tobias
___________________________________________________________
GRATIS für alle WEB.DE Nutzer: Die maxdome Movie-FLAT!
Jetzt freischalten unter http://movieflat.web.de
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio