Matt Ettus wrote: > > Christian Schroeder wrote: >> Hi together, >> >> we want to use the USRP2 with LFTX/LFRX boards to make transmissions >> in a low frequency regime from below 1 kHz up to about roughly 50 kHz. >> The daughterboard specifications give a frequency range from DC to 30 >> MHz. >> >> We are now wondering, if we will experience some degradations since we >> want to work near the specification limits. >> Does anybody know about the frequency response at these frequencies? >> Is there something like a lower bound given by the hardware for >> reasonable working frequencies? >> > > There should be no problem going all the way down to DC. > > Matt > > Dear all, can the benchmark_xx.py used to transmit on this low frequency using the lrtx d.board?is there any limitation that i have to aware? thanks adib ----- Mohd Adib Sarijari Universiti Teknologi Malaysia www.fke.utm.my www.utm.my -- View this message in context: http://old.nabble.com/LFTX-LFRX-frequency-range-tp19915036p29925355.html Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio