Hello, you can find the newest code (for the UHD driver) here: http://ettus-apps.sourcerepo.com/redmine/ettus/projects/uhd/wiki
You can also find a tool with graphical user interface in host/utils to flash the card. The link git.ettus.com/ettus/fpga.git should be correct with the "raw ethernet" host driver, but I think it is included in the UHD repo above as well, so the UHD repository is recommended. LED "D" indicates that the firmware is up and running, if it does not light up it means that (i) the FPGA is not set up or (ii) that the firmware is not running. The problem is probably an error on the SD card. Several issues come to mind here: - both firmware and FPGA bitstream must be flashed on the card. That is, txrx.bin and u2_rev3.bin. You have to use the flash tool twice. - SDHC card are not supported, they must be SD. - you must flash directly to the beginning of the card, so use /dev/sdX instead of /dev/sdX{1,2,3,4,...}. This nukes the filesystem and (possibly) the master boot record, so you cannot have other data on the SD card, and old data will disappear. - mismatch between FPGA and firmware version (but this leads mostly to strange behavior) I have posted more info some weeks ago, and there is a wiki page with more info: http://gnuradio.org/redmine/wiki/1/USRP2UserFAQ#How-do-I-change-the-firmware-and-FPGA-code-on-the-SD-Card Regards, Matthias Am 18.10.2010 um 14:17 schrieb Alan Jones: > Hi > > I am looking for a stable copy of the FPGA code for the USRP2 board. I have > tried the code that come when you run the command > git clone git://git.ettus.com/ettus/fpga.git The builds fine Xilinx ISE 12.2 > but when it copy it onto the SD card and try run the build on the USRP2 board > I only get LED F turning on and when i run the command find_usrp it dose not > find the board. If anyone knows where I can get a stable release of the FPGA > code it would be great. Please note that I don't know my way around with the > git commands so if you please give full command line inputs with would be > great. > > Regards > Alan Jones > Master Student in the RRSG Research Group > University of Cape Town > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio