Hi folks,
I am seeing a very bizarre problem. I am using the USRP2 to transmit a
stream of packets interleaved with silence. Each USRP packet obviously
spans multiple Ethernet packets. When I send each USRP packet as part of
its own burst (i.e. start of burst = 1 on the first ethernet packet
corresponding to a USRP packet, end of burst = 1 on the last ethernet
packet corresponding to that USRP packet, immediate = 1 on all packets,
and repeated for each USRP packet), the channel that I see at the
receiver for each packet has a very different phase even after
accounting for CFO. However, if I send all the USRP packets along with
complex zeros for intervening silence as one burst, I see that the
channel phase is as expected i.e. the change in channel phase from
packet to packet corresponds to exactly the CFO.
Any idea why this could be happening?
Thanks,
Arun.
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio