On 12/14/2010 09:39 AM, Tobias Schmid wrote: > Hello, > > our institute owns 4 USRP2. Three of them can be pinged. > The 4th one cannot. > It's neither possible to use it with UHD firmware and FPGA image. > If I try uhd_find_device no device is found. > The firmware and the FPGA image on the SD card is working fine. > I checked this using one of my other devices. > > Can someone tell me, what the problem might be? > Is it demaged? Is the eeprom demaged? > Or can I solve this problem on my own? >
What LEDs light up upon power on? D and F? Can you attach a serial terminal to the rear and tell me what the USRP2 prints to the terminal at power up? http://www.ettus.com/uhd_docs/manual/html/usrp2.html#debugging-networking-problems Can you try an older image set and tell me if the behavior is the same? http://www.ettus.com/downloads/uhd_images/UHD-images-0000.20100901003255.b5461fc/ Thanks, -Josh _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
