Hello ALL, Does you have an answer to my request , is there something for charity there is possibility for like me to use USRP1.
Kind Regards, On Sun, Dec 12, 2010 at 10:14 PM, Marten Christophe <technosa...@gmail.com>wrote: > Hello Matt, and All, > > Is there possible, you can sell only USRP1 board with all components, only > board no enclosure no power supply only board. with all component soldered > to it , i will arrange specified ratting power supply here locally, > > why i'm requesting it due to i'm a student and dont have that much money to > buy full USRP1+shipping charges > > if you can send only USRP board without enclosures and power supply it will > reduce shipping cost > i have arrange so far $ 300 only , so if it is possible , i will > be thankful to all of you, USRP1 is very much needed for my practicals and > study > you ought to run a program to sell your product to poor students at > discounted rate as Ettus Research being a big organisation now , but USRP1 > was developed as a open source hardware with the help of community and > very use full for us. > > Thanks and Kind regards, > > > On Thu, Nov 4, 2010 at 7:44 PM, Marten Christophe > <technosa...@gmail.com>wrote: > >> Hello Mr. Ettus, >> >> Thanks a lot, at least for you reply. >> Now I will have to search some other cheap SDR, or will have to wait >> another one year when i will get my scholarship >> then buy your marvelous product the USRP1.. >> >> >> Thanks and Kind regards, >> >> >> >> On Fri, Nov 5, 2010 at 1:08 AM, Matt Ettus <m...@ettus.com> wrote: >> >>> >>> No. We do not have or sell blank PCBs. >>> >>> Matt >>> >>> On 11/04/2010 12:30 PM, Marten Christophe wrote: >>> >>>> Ohhhh, Mr. Ettus, >>>> >>>> at least give me a blank PCB, coz by very hard work i have collected IC >>>> , FPGA , and all other things, by requesting sample part, if i were >>>> moneyed >>>> i must have buy USRP1, >>>> >>>> if i will have a blank PCB at least i will sold all parts , and i wont >>>> have to copy any others work, and design , and i will kept away my self >>>> from theft, you know, >>>> even i will PAY the blank PCB material cost. and postal charges, from >>>> US to india, but i buy USRP1 , that i need to shiped, and again high >>>> amount. >>>> >>>> after all i'm student...from India. >>>> >>>> Kind Regards, >>>> >>>> >>>> On Fri, Nov 5, 2010 at 12:51 AM, Matt Ettus <m...@ettus.com >>>> <mailto:m...@ettus.com>> wrote: >>>> >>>> >>>> No >>>> >>>> On 11/04/2010 12:20 PM, Marten Christophe wrote: >>>> >>>> Hello Mr. Ettus , >>>> >>>> If you are unable to provide that , know problem , but least >>>> reply my >>>> mail with negation so i wont wait and for you, and start trying >>>> to >>>> design PCB >>>> with the help of you .SCH file of USRP 1 and will collect money >>>> to >>>> fabricate it, but for only one PCB it take around $500 start >>>> cost. :( >>>> and more over before doing so, i want you permission b'coze it >>>> was >>>> designed by you so if it is my moral responsibility to seek your >>>> permission on first place. >>>> >>>> Kind Regards, >>>> Devendra Purohit >>>> >>>> On Thu, Nov 4, 2010 at 12:02 AM, Marten Christophe >>>> <technosa...@gmail.com <mailto:technosa...@gmail.com> >>>> <mailto:technosa...@gmail.com <mailto:technosa...@gmail.com>>> >>>> wrote: >>>> >>>> >>>> >>>> On Mon, Nov 1, 2010 at 11:04 PM, Marten Christophe >>>> <technosa...@gmail.com <mailto:technosa...@gmail.com> >>>> <mailto:technosa...@gmail.com <mailto:technosa...@gmail.com>>> >>>> wrote: >>>> >>>> >>>> Hello Mr. Ettus, >>>> >>>> >>>> Kindly provide me USRP motherboard Blank PCB board. i >>>> will pay >>>> for postage and material cost. >>>> I'm a poor student and USRP is needed for my research >>>> work and >>>> study, i have almost all components collected by sampling >>>> so i can assemble and sold all of them >>>> if i will have PCB . >>>> $1400+400+ UPS courier charges(oversease shipping) it is >>>> beyond >>>> my ability to spend. >>>> I'm a private Student and keen to learn,but I'm poor too >>>> , hence >>>> don't have capability to buy USRP, >>>> so I'm also trying to make USRP my self. but dont' have >>>> resources to fabricate PCB. >>>> though i have collected all component some of those were >>>> costly >>>> i arranged samples, >>>> only thing left is PCB. can you kindly help me to give >>>> me blank >>>> PCB for USRP ( whether usrp1 or usrp2) mother and >>>> daughter >>>> board . I will pay the cost what ever it would be for >>>> postage and >>>> your material in advance. >>>> also i need you generous help also , at least guidance. >>>> I'm Doing MS in Communication system by distance learning >>>> program of a Govt university. >>>> Kind Regards, >>>> Manoj Kumar ( India ) >>>> >>>> >>>> >>>> >>>> >>>> >>> >> >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
