Hi, this is my first message so hi everyone. Well, at last i have my USRP (i got it yesterday), it works (a Flashing green led is working, ok). But, looks like i can't "open" the usrp. Ok, after search by internet it seems like it is an USB controller error (by the way, seems to be the TYPICAL error). I'm quite sure about that because it works fine in other computer. (But in fact i need it to work in the other one, the one with the error).
So, lsusb says: ========================================================== Bus 002 Device 003: ID 03f0:7604 Hewlett-Packard DeskJet 3940 (My printer, maybe is not the best but it's mine and i like it :P XD) Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub <= So i HAVE the hardware needed haven't i? ========================================================== lsmod says there is no "ehci" so, yes THIS is the problem, i have the the hardware but i have no controller for that, isn't it? After looking by internet i have read that there is a typical problem with USB 2.0 and Ubuntu 64bits (which is the OS that i'm using). Anyway i can't find any solution, how i install the controller? (USB 2.0 is actived in the BIOS). Thanks a lot for your time. -- View this message in context: http://old.nabble.com/USB-controller.-How-to-solve-ehci-problem--tp30584635p30584635.html Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
