Hey all - I'm attempting to make the necessary changes to get benchmark_tx/rx.py working on the E100 with UHD. My end goal is to preserve backwards-compatibility with non-UHD runs since the old USRP[1,2] drivers will remain in GNURadio for a bit longer. As it turns out, this requires very little modification to the actual benchmark_tx/rx scripts themselves, and more in generic_usrp.py, usrp_transmit_path.py, pick_bitrate.py, and the like.
Anyways, I've got the benchmark_tx stack to the point that it starts up, detects the E100, and runs off on it's merry way transmitting. At least, it thinks it is transmitting. Spectrum analyzers show the channel as completely empty though. I'm trying to track down why the E100 thinks it is putting data over the air, but actually isn't. I have a suspicion that it has something to do with my ugly, ugly hacks to bypass some of the old generic_usrp interface for UHD functions, but I can't seem to track it down. I've thrown my changes up on GitHub in case anyone else working on the E100 has an interest in this, and maybe wants to have a look and see if I'm just doing something silly. Word of warning: My changes thus far are _EXTREMELY_ ugly. "generic_usrp.py" is littered with 'FIXMEs', and the current state of the code in no way reflects the end goal. Right now, I'm just trying to get a grasp on how this needs to come together, and how to make it work to begin with. Once that is done, I'll get it production-worthy. Also, note that my changes thus far are UHD + E100 specific - it is unlikely that these changes will enable UHD + USRP[1,2]/N210 in their current form, although that is the end goal. The code: https://github.com/bhilburn/gnuradio-on-e100 Running it: # ./benchmark_tx.py -f 462M -u uhd Once this is all done and cleaned-up, I'll send out a patch/commit with the final changeset. Cheers, Ben _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
