Hy Marcus, are you sure? I think the problem is related to the setting of
parameters of the USRP2 like decimation, interpolation, sample time, etc. ..
However I try to follow your advice and post in a public maining list you
suggested. Thank you very much.
If you aren't using Gnu Radio to set those parameters, instead using
Simulink, then
there's nothing GnuRadio-relevant that is applicable here.
Sure, there *may* be people on this list who are users of both Gnu Radio and
Simulink/MATLAB, who may be able to make suggestions, but this isn't
really
the right forum for such discussions.
Let me use a bit of a metaphor. You own a Kawasaki motorcycle, that
happens to
use a fuel pump manufactured by Borg-Warner. A well-known Ford
compact sedan
happens to use the same fuel pump. But instead of going to Kawasaki
when you have
problems, you go to Ford customer support instead. Not likely to be
nearly as productive
a route for you as going to Kawasaki directly.
The USRP forums at Ettus were created specifically for people who are
using the USRP
family in environments other than Gnu Radio, so they'll be
"populated" by folks
more familiar with the environment that you're using.
--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
