Hi Yan
I did it as well, but it seem wait for infinite time before it is
finished.....
But without the lock() and unlock(), everything returns to normal.
Thanks,
Guanbo
On Wed, Feb 23, 2011 at 5:55 PM, Yan Nie <yn...@uwo.ca> wrote:
> Hi Guanbo,
>
> In my case, I added a tb.wait() after the tb is unlock to wait for the
> unlock action finished, so that the last line shows. However, it still gives
> the carrier wave on the oscilloscope. I also tried
> top_block._u._subdev.set_enable(False) to completely disable the transmitter
> then set_enable(True) to re-enable the transmitter based on hardware
> consideration, but it still doesn't work
>
> On 02/23/11, *Guanbo * <gbzh...@gmail.com> wrote:
>
>
> Hi, Yan
>
> I tried the similar python code as yours, as follows:
>
> tb.start()
> send_pkt("payload", eof=False)
> print "before lock()"
> tb.lock()
> print "after lock()"
> time.sleep(1)
> print "before unlock()"
> tb.unlock()
> print "after unlock()"
>
> I found out that, the last print is not showing up.
>
> Do you have idea regarding to this issue?
> Thanks
>
>
>
>
>
>
> Yan Nie wrote:
> >
> >
> > Hi Jason,
> >
> > I really appreciate your help about the problem that I got. The info
> > related to the GNURadio and the USRP that I'm using is listed in the
> > following.
> >>
> >> Please confirm that you just see the carrier, not your modulated
> >> signal when using the lock()/unlock()
> >
> > I checked the result of using lock()/unlock() by correlating the down
> > converted signal with the Barker code, at the transmission pause
> interval,
> > there is no correlation peak. Therefore, it turned out there is no code
> > transmitted during the transmission pause interval. Is it a right way to
> > test if there is Barker code transmitted during the transmission pause
> > interval? Is lock/unlock working for completely turning off the signal
> > transmission for 5ms? However, I'm sure when using lock/unlock method
> > still gives at least carrier signal in the pausing interval, which is
> > observed on the oscilloscope.
> >
> >>
> >> Also, please tell us:
> >>
> >> What version of GNUradio are you using?
> >
> > The version of GNUradio that I'm using is GNURadio 3.2svn
> >
> >>
> >> What hardware are you using? USRP? which daughterboard?
> >
> > I'm using USRP1 with LFTX daughterboard plug-in. (similarly, at the
> > receiver side,USRP1 with LFRX plug-in is utilized. )
> >
> >>
> >> Are you using UHD?
> >
> > I'm not using UHD.
> >
> > Thank you so much for all of your help!
> >
> > Thanks,
> > Yan
> >
> > begin:vcard
> > n:;
> > adr:;;;;;;
> > version:2.1
> > end:vcard
> >
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > Discuss-gnuradio@gnu.org
> > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> >
> >
>
> --
> View this message in context:
> http://old.nabble.com/how-to-stop-the-top_block-and-restart-signal-transmission-tp30982478p30999857.html
> Sent from the GnuRadio mailing list archive at Nabble.com.
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> Discuss-gnuradio@gnu.org
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
--
Regards,
Guanbo
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
