Hello everyone I’m using an USRP with a XCVR2450 daughter board working at 2.4 - 2.5 GHz. I want to find a threshold between thermal noise and signals energy using the script usrp_spectrum_sense.py and sensing from 2.400 GHz to 2.500 GHz. To do that, I replaced the WiFi antenna with a resistor of 50 Ω to measure the noise. I obtained a very strange peak at the beginning of the bandwidth (around 2.405 GHz) and this result was totally unexpected because I supposed to sense only thermal noise without any particular peak. So, I repeated the experiment from 2.420 GHz to 2.500 GHz and I achieved the same peak always at the beginning of the bandwidth (in this case around 2.425 GHz). Therefore, I'm quite sure this is a problem linked to USRP or to the script usrp_spectrum_sense.py, isn’t it? Can someone give me a hint about that please?
Regards -- View this message in context: http://old.nabble.com/Unexpected-energy-peak-sensing-thermal-noise-and-using-usrp_spectrum_sense.py-tp31700266p31700266.html Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio