Hi Josh, > There was some shuffling around with the uhd master branch for the 3.2 > releases. If you are running off the master, can you rebuild from the > latest master (fc349d30507620baca935e75e68a9554b40d427c) and load the > latest images (firmware and FPGA) > http://www.ettus.com/downloads/uhd_releases/master_images/ I think that > will solve your problem.
Loading the released binary images did not solve my problem. I tried them all. The problem persists in the same way I described it. Rebuilding the usrp2 firmware is with an issue too: make[5]: Entering directory `/home/marius/gnuradio_build/gnuradio/usrp/host/swig' make[5]: *** No rule to make target `/usr/include/fpga_regs_common.h', needed by `usrp_prims.py'. Stop. make[5]: Leaving directory `/home/marius/gnuradio_build/gnuradio/usrp/host/swig' make[4]: *** [all-recursive] Error 1 make[4]: Leaving directory `/home/marius/gnuradio_build/gnuradio/usrp/host' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/home/marius/gnuradio_build/gnuradio/usrp' make[2]: *** [all] Error 2 make[2]: Leaving directory `/home/marius/gnuradio_build/gnuradio/usrp' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/marius/gnuradio_build/gnuradio' make: *** [all] Error 2 I'm not sure right now how to solve this... Thanks for the points so far. Best, Marius _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
