> -----Original Message----- > From: Marcus D. Leech [mailto:mle...@ripnet.com] > Sent: Thursday, 18 August 2011 2:16 PM > To: Kyle Zhou > Cc: discuss-gnuradio@gnu.org > Subject: Re: [Discuss-gnuradio] usrp2 on windows - network cable > unplugged > > On 08/18/2011 12:09 AM, Kyle Zhou wrote: > > > > Yes, I did configured it as static IP 192.168.10.1 > > Actually windows did show 'connected, firewalled'. but after a few > > seconds, it turned to unplugged. This is weird to me. > Well, if it really is configured for a static IP, you might see if > there's a way to force the card to only use > 1GiGe. I don't know how to do that in windows, but I do know that > some 1GiGe PHY implementations > don't auto-negotiate properly, so if you can force the ethernet > hardware to run always at 1GiGe, and > not auto-speed negotiate, that sometimes helps. > > > > -- > Principal Investigator > Shirleys Bay Radio Astronomy Consortium > http://www.sbrac.org > Yes, you are right. When I configure the Ethernet interface to the 1Gb only mode. It works! Thanks a lot.
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio