Hi, Nick, Vadim, Josh, I got the same problem with two N210 in my institute, that only LED B & F is on. I tried to reprogram the FPGA following the thread "Bricking and recovery of N210" but it remains the same?
Have you found how to work it out? Cheers, Hanwen 2010/12/14 Nick Foster <n...@ettus.com> > On Tue, 2010-12-14 at 11:57 +0100, Vadim Uvin wrote: > > Hello list, > > > > I am trying to get USRP N210 running. I experience a problem when I > > connect it to my computer. I see only B and F LEDs on, the Ethernet > > LEDs are shut down after about one second of switching on USRP. > > "mii-tools eth0" outputs "1000 MBit, half duplex, no link". Wiresharks > > shows no packets exchanged. > > > > I also have set up the UHD and configured the eth0 to static address > > 192.168.10.1, but uhd_find_devices shows nothing. > > > > Any ideas how I can proceed? > > Vadim, > > Have you tried another cable? Has your setup worked with USRP2s in the > past? > > --n > > > > > > Thanks. > > > > Vadim. > > _______________________________________________ > > Discuss-gnuradio mailing list > > Discuss-gnuradio@gnu.org > > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
