On 10/04/2011 10:02 PM, Nazmul Islam wrote: > Hello, > > I am trying to use the "old" gnuradio python programs in a USRP2 > daughterboard. I am facing the "unable to find USRP [0]" problem. I know > that questions regarding this problem have appeared before. However, I am > still posting my problem since it is probably occurring due to the > compatibility issues between "UHD" and "Non-UHD" image. > > At first, I used to image the usrp2 with "gnuradio-3.3.0" image and run > benchmark codes. It ran fine. Now, the authorities in my laboratory are > using UHD compatible SD cards to run codes in USRP2. USRP2 has been imaged > with UHD_003_002_001 image. Using this image, when I log in to the node, I > can go to the gnuradio folder by giving the following command: > > *cd gnuradio-uhd/gnuradio/* > > Thereafter, I give the following commands: > > *ifconfig eth2 192.168.10.1* > *ifconfig eth2 up* > * > * > *find_usrps* > > However, it says "No USRP found" (but I know that the daughter-boards are > properly connected). >
http://gnuradio.org/redmine/projects/gnuradio/wiki/FAQ#I-upgraded-to-UHD-and-now-usrp2_find_devices-usrp2_probe-doesnt-work Helps? _josh _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio