I'm using an Ettus N210. I have a simple block diagram in GRC with a cosine signal source feeding a throttle feeding the usrp sink. All share the samp_rate variable as their sampling rate, which I am trying to get to 50M. So far, I've been able to achieve up to 25MSPS using Complex int16 as the wire format with minimal under sampling (A few 'U's are printed to the terminal at first, but it eventually stabilizes and stops printing Us). I've been able to get 33.333333MSPS with minimal undersampling using complex int8. I'm yet to achieve 50MSPS. I have an older computer that was unable to achieve these sample rates, so I thought it might be my pc. However, this laptop has a Core i5 M450 @2.4GHz, 4Gb DDR3 and a gigabit Ethernet card (integrated though). I'm not sure how much power gnuradio requires, but I feel like this is a fair amount for most applications. I've set sudo sysctl -w net.core.rmem_max=50000000 and sudo sysctl -w net.core.rmem_max=50000000. Not sure what else I can do. I thought maybe I could change the decimation rate, but that's not going to help if I can't change the format over the wire. Any help is appreciated! -- View this message in context: http://old.nabble.com/Cannot-Achieve-50MSPS-Sampling-Rate-tp33444517p33444517.html Sent from the GnuRadio mailing list archive at Nabble.com.
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
