Dear Mr. Blum, Belated thanks for your advice. I did install libusb1.0-dev and the post install tasks, but I still got the same error as before (the devices not found error ) and the computer did not recognize the USRP1. I will keep trying though, thanks for your advice!
Many thanks, J. On Sun, Apr 29, 2012 at 3:33 PM, Josh Blum <j...@ettus.com> wrote: > > > On 04/29/2012 12:29 PM, Ji Slee wrote: >> Hello, >> >> I am a high school student who has been working with gnuradio. I have >> been trying to reinstall gnuradio with UHD, but am getting the No >> device error. In internet searches, I have found others who have had >> the same error, but I have not found the solution to the problem. >> >> I installed per redmine and ettus instructions below (also included prior >> dep.) >> For UHD: >> >> git clone git://code.ettus.com/ettus/uhd.git >> >> cd uhd/host >> mkdir build >> cd build >> cmake ../ > > was usrp1 one of the configured components? > If not you need to install libusb1.0-dev > > http://files.ettus.com/uhd_docs/manual/html/build.html#libusb > >> make >> make test >> sudo make install >> > > Did you do the post install tasks? like installing udev rules? > > http://files.ettus.com/uhd_docs/manual/html/transport.html#setup-udev-for-usb-linux > > -josh > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
