Hi, I was using Funcube dongle and found a strange bug. Whenever I used the FCD source in my flow graph and started the flow, the (demodulated) signal came out corrupted. However, if I then just started qthid, it would correct itself and could see bits in waveform perfectly well. This was happening with different firmware versions.
With a bit of experimenting in the earlier out of tree gr-fcd, I found out that reverting two commits[1][2] resulted in resolving the issue. I've made changes to in-tree gr-fcd and recompiled and it's now working in a way, but issues remain. One is setting frequency at runtime (via a variable), where FCD flips back into spitting out corrupted waveform. This is where the problem outgrows my knowledge. Kind regards, Gasper Zejn [1] https://github.com/csete/gr- fcd/commit/02a773ebf5ce01b8f527fb8f8b6f74e6b8191cab [2] https://github.com/csete/gr- fcd/commit/407b4281dbc9b3bc7b1eb58a5fb8acf500607fda _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
