Hello I want to know the IP address of USRP2. My problem is I want to use usrp2 device with Matlab Simulink for that I need to know the Ip of the USRP and be sure about it. I used usrp2_recovery --ifc=eth0 --new-ip=192.168.10.2 And it says the Ip has been changed. Is there a method from which I can verify that the IP address has been changed.
Regards, Umer Rabbani | Researcher Polaris House, PP129 B29, Adastral Park, Ipswich, UK Postal Code IP5 3RE 01473645887| - 0743 57 67 821 -----Original Message----- From: discuss-gnuradio-bounces+umer.rabbani=bt....@gnu.org [mailto:discuss-gnuradio-bounces+umer.rabbani=bt....@gnu.org] On Behalf Of Josh Blum Sent: 31 May 2012 19:23 To: discuss-gnuradio@gnu.org Subject: Re: [Discuss-gnuradio] Cannot ping the usrp2 On 05/31/2012 09:11 AM, Martin Braun wrote: > On Thu, May 31, 2012 at 05:01:56PM +0100, umer.rabb...@bt.com wrote: >> I am using USRP2 device my device works fine with GNU radio. > > Hm, so what exactly is your problem? > >> O.S=Ubuntu 10.04 >> Ip settings 192.168.10.1 netmask 255.255.255.0 >> >> I tested the firewall is disabled by using umer@umer:~/Downloads$ >> sudo ufw status >> Status: inactive >> >> I want to ping the ip address 192.168.10.2 but the response is unreachable. > > I don't think you *can* ping USRP2s. > Yea the fw for the old libusrp2 drivers didnt have ping. But its fine on UHD :-) Start here to get the driver and images: http://code.ettus.com/redmine/ettus/projects/uhd/wiki And the SD card instructions: http://files.ettus.com/uhd_docs/manual/html/usrp2.html#load-the-images-onto-the-sd-card-usrp2-only -josh _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio