On 01/02/13 06:29 PM, Rahman, Muhammad Mahboob Ur wrote: > All, > > When I connect my USRP N200 to a PC running Suse, run ifconfig eth0 > 192.168.10.1 command, and then run command uhd_usrp_probe > --args="addr=192.168.10.2", I see the famous error message: > /LookupError: KeyError: No devices found for ----->/ > /Empty Device Address/ > The weird fact is that I have 9 other USRP N200 radios which get > detected when I run the command uhd_usrp_probe > --args="addr=192.168.10.2" on the same PC (so it shouldn't be a > firewall issue). For the problematic USRP N200 I have done the following: > > ping 192.168.10.1 which is fine > ping 192.168.10.2 which shows the error message that destination is > unreachable > > I have also used switch S2 to enter into safe mode, burn the right > binaries (3.4.4 from maint branch), power-cycle the device but the > problem persists. > > Any ideas on what might be preventing the USRP N200 from being > identified by the host PC? > > Does the green "Link" light on the USRP come on, and does the yellow activity light blink from time to time when it's plugged in to the host machine?
-- Principal Investigator Shirleys Bay Radio Astronomy Consortium http://www.sbrac.org
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
