On 06/12/2013 12:42 PM, Dan CaJacob wrote:
I think the range across which you have acceptable linearity may be
somewhat related to the type of signal you are using. The general
recommendation in the past has been to stick below 0.2 The graphs
show that you only lose about 7 dBm of total possible power by backing
off the digital amplitude to 0.2 max and you get a linear 1 dBm power
output increase for every 1 dB gain increase across the entire gain
range of the WBX.
By they, it is a bit unrelated, but I also measured -119 dBm for 12 dB
SINAD on the RX side with an 8920A specan.
Very Respectfully,
Dan CaJacob
HiDan,
Did you perform any measurements of amplitude and/or gain across the
freq range of the board? I'd expect it to vary somewhat since it's such
a wideband board, but it'd be interesting to learn the relationship.
Thanks,
Sean
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio