I am new to linux and GNURadio.  I don'g follow where the 1 bit/byte is coming 
from. Does the audio source not deliver 8bit/sample or how do you figure that 
out? I don't see anything such as "gnuradio>digital>generic_mod_demod.py " in 
my directories. Thanks for the help.
Tom


------------------------------------------------------------------------------------------------------------------------------


Tom,

There are few changes required in ur FG
  1: PSK/QAM Modulator takes packed byte input (8 bits per byte) instead of 1 
bit per byte
               see gnuradio>digital>generic_mod_demod.py
  2: Constellation sink work only for PSK modulation M=2,4,8. 

To see output constellation of QAM-16 u will have to first downsample it 
to 1 sample_per_symbol and then use wx-scope-sink in XY-Mode

Down-sampling can be done using symbol-timing blocks or manually 
(delay+keep1inN combination) as in attached FG 

-Adeel



>________________________________
> From: Adeel Anwar <adeela...@gmail.com>
>To: tom sutherland <alphatoz...@yahoo.com>; discuss-gnuradio@gnu.org 
>Sent: Friday, July 5, 2013 10:25 PM
>Subject: Re: [Discuss-gnuradio] Simple QAM project
> 
>
>
>
>Can u attach ur GRC file?
>
>-Adeel
>
>
>
>
>On Fri, Jul 5, 2013 at 5:48 AM, tom sutherland <alphatoz...@yahoo.com> wrote:
>
>I am trying to get data through a QAM-16 Modulator and just display the data 
>stream on a Constellation Sink. I have 8khz sampled 8-bit data(char) going 
>into the QAM Mod block. I have the output of the QAMmod block going directly 
>into the Const Sink. I am not seeing anything on the Constellation Sink. I put 
>a throttle block in but that didn't help.
>>Any thoughts on what could be wrong? I have followed the GNUradio tutorial: 
>>Part 4 by balint256 but didn't help.
>>Thanks...DT
>>
>>
>>
>>_______________________________________________
>>Discuss-gnuradio mailing list
>>Discuss-gnuradio@gnu.org
>>https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>
>>
>
>
>
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Reply via email to