Phil has kept the gnuradio recipe in OE up to date, so you should be able to get the latest version you want. You may need to get a more recent version of Angstrom, though.
Have you tried using opkg update/upgrade? If that doesn't work just try using a newer image. If you don't want to cross compile there's plenty of options. You could grab a premade image from angstrom website, or build your own here: http://dominion.thruhere.net/koen/narcissus/ On Mon, Jul 22, 2013 at 11:55 AM, Nemanja Savic <vlasi...@gmail.com> wrote: > there is no such option args is the answer from app. > hm, because it was in repo of angstrom linux, and I don't know If I can > handle crosscompiling of newer version (is there any other way?) > > > On Mon, Jul 22, 2013 at 5:52 PM, Marcus Leech <mle...@ripnet.com> wrote: >> >> really? >> >> So, if you uhd_rx_cfile --args "type=usrp1" >> >> What happens? >> >> Why the horribly-out-of-date Gnu Radio? (And corresponding version of >> UHD?) >> >> >> on Jul 22, 2013, Nemanja Savic <vlasi...@gmail.com> wrote: >> >> But there is no option for that (type). it is gnuradio 3.4.3. >> >> >> On Mon, Jul 22, 2013 at 5:11 PM, Marcus Leech <mle...@ripnet.com> wrote: >>> >>> If you don't explicitly specify a device address, UHD will search through >>> the defaults, including for an N2XX at 192.168.10.2. >>> >>> Just specify "type=usrp1" in the the device args. >>> >>> >>> on Jul 22, 2013, Nemanja Savic <vlasi...@gmail.com> wrote: >>> >>> Hallo guys, >>> >>> I have installed gnuradio on Beaglebone black, which runs under Angstrom >>> linux. >>> uhd finding devices works good, and I am able to see my usrp1 device, but >>> when I run uhd_rx_cfile i get following error: >>> >>> linux; GNU C++ version 4.5.3 20110311 (prerelease); Boost_104500; >>> UHD_003.000.001-5ace684 >>> >>> Traceback (most recent call last): >>> File "/usr/bin/uhd_rx_cfile.py", line 143, in <module> >>> tb = rx_cfile_block(options, filename) >>> File "/usr/bin/uhd_rx_cfile.py", line 51, in __init__ >>> num_channels=1) >>> File "/usr/lib/python2.6/site-packages/gnuradio/uhd/__init__.py", line >>> 74, in constructor_interceptor >>> return old_constructor(*args, **kwargs) >>> File "/usr/lib/python2.6/site-packages/gnuradio/uhd/uhd_swig.py", line >>> 1831, in usrp_source >>> return _uhd_swig.usrp_source(*args, **kwargs) >>> RuntimeError: Network is unreachable >>> >>> Can anybody tell what is the problem about? >>> Thanks >>> >>> -- >>> Nemanja Savić >>> ________________________________ >>> >>> _______________________________________________ >>> Discuss-gnuradio mailing list >>> Discuss-gnuradio@gnu.org >>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> >>> >> >> >> >> >> -- >> Nemanja Savić >> >> > > > > > -- > Nemanja Savić > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio