The last device I received did not appear to have the correct IP set from the factory.
I had to reset using the "Device recovery and bricking" procedure here: http://files.ettus.com/uhd_docs/manual/html/usrp2.html#load-the-images-onto-the-on-board-flash-usrp-n-series-only and set the IP using the "Change the USRP2's IP address" section from the same page. On Thu, Aug 01, 2013 at 12:35:42AM -0700, Mohammed Ramadan wrote: > > > Dears, > i > Have USRPn210 with SBX daugtherboard. I installed the gnuradio and Uhd. > But have problem that the PC not see the USRP. i edit the ips to make > the device 192.168.10.2 and same problem. so, can any one help me to > connect the USRP with the PC( the IP , DNS, and the Default gatway). > > Best Regards, > M.Ramadan > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio