Yeah, I would take that to the osmocom-sdr list, that's where those developers usually hang out.
Jared On Oct 10, 2013 9:22 PM, "Ralph A. Schmid, dk5ras" <ra...@schmid.xxx> wrote: > What is “directly”? J At least I can use it before updating all this > stuff, GR can RX and TX just fine, but through GR-osmosdr.**** > > It looks to me that osmosdr may be the deeper involved in the problem, > when not updating this one nothing wrong is happening.**** > > ** ** > > At the moment I am on latest revision with bladerf and gqrx, gqrx works, > gnuradio works. Just updating gr-osmosdr will break things.**** > > ** ** > > Ralph.**** > > ** ** > > ** ** > > ** ** > > *From:* Jared Clements [mailto:jared.cleme...@gmail.com] > *Sent:* Friday, 11 October, 2013 02:21 > *To:* Ralph A. Schmid, dk5ras > *Cc:* GNURadio Discussion List; Brian Padalino > *Subject:* Re: [Discuss-gnuradio] Again bladerf / gqrx / gr-osmosdr**** > > ** ** > > Those look a lot like some errors I was getting a short while ago. They > popped up while the compiler was at the linking stage. My errors were in > the CMakeList.txt files, which were somewhat opaque to me.**** > > By elimination, can you verify that gnuradio can access your bladerf > directly? Say a source to an fft plot, tuned to a local FM radio station? > **** > > Jared**** > > On Oct 10, 2013 11:13 AM, "Ralph A. Schmid, dk5ras" <ra...@schmid.xxx> > wrote:**** > > It stays the same, after uninstalling everything, pulling fresh repos, > building and installing bladeref, gr-osmosdr and gqrx in this order the > message when building gqrx remains > > /usr/local/lib/libgnuradio-osmosdr.so: undefined reference to > `bladerf_fpga_version' > /usr/local/lib/libgnuradio-osmosdr.so: undefined reference to > `bladerf_fw_version' > collect2: ld returned 1 exit status > make: *** [gqrx] Error 1 > ras@ubuntu:~/gqrx$ > > Ralph. > > > -----Original Message----- > > From: Brian Padalino [mailto:bpadal...@gmail.com] > > Sent: Thursday, 10 October, 2013 15:38 > > To: Ralph A. Schmid, dk5ras > > Cc: Alexandru Csete; GNURadio Discussion List > > Subject: Re: [Discuss-gnuradio] Again bladerf / gqrx / gr-osmosdr > > > > On Thu, Oct 10, 2013 at 1:52 AM, Ralph A. Schmid, dk5ras > <ra...@schmid.xxx> > > wrote: > > > Hi, > > > > > >> Looks like there is something missing from your libbladeRF.so. The > > >> repository shows they were added on October 2nd. Are you sure you're > > >> building the latest stuff? > > > > > > Should be the latest, when doing a git pull right before building it. > > > I did not yet delete the whole BladeRF folder and clone into a totally > > > new folder, maybe this helps? > > > > I always recommend blowing away the build directory and rerunning cmake > .., > > make, sudo make install. > > > > That is the best way I've found to make sure things are fresh. > > > > I just rebuilt against everything last night and things seemed fine to > me. > Others > > have also reported success. > > > > Let me know how it goes. > > > > Brian > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio**** >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
